P20 Steel Plate, 1.2311 Steel, 3Cr2Mo Steel, Plastic Mold Tool Steel
- Description
- Size Guide
Description
P20 Steel Plate 1.2311 | 3Cr2Mo | Plastic Mold Tool Steel.
What is P20 Steel Plate 1.2311 (3Cr2Mo, Plastic Mold Tool Steel)?
Jaiganesh P20 Steel Plate 1.2311 Material is a versatile, high-performance low-alloy tool steel that is characterized by high toughness at moderate strength levels.
Jaiganesh Steel COMPANY offers A special purpose mold steel plate that is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc.
Jaiganesh Steel mold steel plate material is typically sold in pre-hardened condition at a hardness of approximately 300 HBW.
Jaiganesh Steel tool steel differs from area to area in the different countries.
Europeans use the DIN spec-DIN EN ISO 4957 standard materials (DIN 1.2311 and DIN 1.2312), while in Japan steel industry standard, PX5 is the new standard P20.
And the Americas Countries, Grade steel P20 is the most widely used steel grade material.
In China, 3CrM2Mo is the P20 steel grade equivalent, which is in the standard GB/T 1299 tool steel specification.
Jaiganesh Steel tool steels are nitrided or carburized.
These Jaiganesh Steel mold steel materials steels can be machined into complex and large dies and molds.
Material P20 steel plate and round bars are mostly used in carburized conditions.
The presence of chromium and nickel enhances the toughness and hardness of mold steel P20 grade material.
1. Supply Range of P20 Steel Round Bar: diameter 200mm–1000mm Steel Plate: thickness 16-100mm x width 200-2000mm Surface Finish: Black, Rough Machined, Turned or as per given requirements.
P20 Steel Plate 1.2311 Chemical Composition.
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
