1.2316 ESR Steel 155mm x 610mm corrosion resistance mould steel
1.2316 ESR Steel 155mm x 610mm
1.2316 is a chrome-molybdenum steel with improved corrosion resistance properties, 1.2316 possesses good polishability, toughness, heat resistance and wear-resistant properties. It is often used for tools for processing chemically aggressive plastic materials
- Description
- Size Guide
Description
1.2316 ESR Steel 155mm x 610mm corrosion resistance mould steel.
1.2316 ESR grade Steel possesses good polishability of steels surface, toughness.
heat resistance and wear-resistant properties.
1.2316 steel have good corrosion resistance properties.
its a chrome-molybdenum steel grade.
It is often used for tools for processing chemically aggressive plastic materials.
1.Chemical Composition
Chemical composition of DIN 1.2316 Mould Steel/ DIN 1.2316 equivalent grades: X38CrMo16
| C | SI | Cr | Mo | Mn | P | S | Ni |
|---|---|---|---|---|---|---|---|
| 0.33-0.45% | 1.00% max | 15.50-17.50% | 0.80-1.30% | 0-1.50% | 0.03% max | 0.03% max | 1.00% max |
2.Strength
280 – 325 HB
(≈ 950 – 1100 N/mm²)
3.Thermal Conductivity At 100°C
18 W/m K
4.Character
corrosion resistant, high-alloy, polishable, pre-toughened tool steel.
5.Heat Treatment
already pre-toughened; usually no heat treatment required.
6.Soft Annealing
760 to 800 °C for about 4 to 5 hours; slow controlled cooling of 10 to 20 °C per hour to about 650 °C; further cooling in air, max. 230 HB
7.Hardening
1030 to 1050 °C
15 to 30 minutes keeping curing temperature
quenching in water/oil
obtainable hardness: 49 HRC
8.Tempering
Slow heating to tempering temperature immediately after hardening. Minimum time in furnace: 1 hour per 20 mm part thickness.
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
