D2 Steel | High Speed | 8mm 10mm | Round bar| superior quality
- Description
- Size Guide
Description
D2 steel | high speed | 8mm, 10mm, | round bar| superior quality.
Introduction to D2 steel.
D-2 steel is an air-hardening, high-carbon, high-chromium tool steel.
It has high wear and abrasion-resistant properties. D-2 steel shows little distortion on exact hardening.
It is heat treatable and will offer a hardness in the range of 55-62 HRC, and is machinable in the annealed condition.
D-2 steel’s high chromium content gives it mild corrosion-resisting properties in the hardened condition.
Chemical composition.
| SI | Cr | V | C | Mo |
| 0.30% | 12.00% | 0.92% | 1.51% | 0.80% |
Applications.
Tools.
Forming Rolls.
Tire shredders.
Knives, slitters, shear blades.
Stamping or Forming Dies.
Scrap choppers.
Punches.
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
